Por qué elegirnos?
xiamen biao power technology co., ltd.que se dedica a la I + D y la fabricación de grupos electrógenos diesel desde su establecimiento en 2012, ubicado en el parque industrial xiangan binyinu, zona económica especial de xiamen, con modernos talleres de producción estándar e instalaciones de oficinas, es un fabricante que integra diseño, investigación y desarrollo, producción y venta: motores, grupos electrógenos, grupos electrógenos a gas natural y ventiladores
  • garantía por 2 años
    garantía por 2 años
  • tiempo de entrega más rápido
    tiempo de entrega más rápido
  • bajo consumo de combustible
    bajo consumo de combustible
  • db de bajo ruido
    db de bajo ruido
Categorías de Producto
hacer productos que comprendan las necesidades del cliente y creen valor para los clientes. Con reservas técnicas avanzadas y una excelente calidad de producto, ukkms ha posicionado con éxito el mercado chino de grupos electrógenos de alto nivel.
Ver más productos...
acerca de
2012

establecimiento de la empresa

certificados honorables de ba power con licencia comercialba power productions se somete a las certificaciones iso8525, gb / t2820-97 y ce, y la calidad certificada por los sistemas de gestión iso9001 e iso14001 para garantizar productos y servicios de alta calidad. nuestros productos se aplican ampliamente a los campos enresisdential, comercial, mercado, eléctrico, alquiler,telecomunicaciones, ferrocarril, construcción, energía eléctrica, militar, fábricas, carreteras, petróleo, construcción naval, etc., y se exporta a países de todo el mundo.nuestras marcas de motores:perkins, cummins, doosan, mtu, ricardo, ukkms, ect.marcas de paneles de control: reino unido deepsea, czech comap, smartgennuestro soporte técnico: contamos con ingenieros y diseñadores profesionales que han estado trabajando en la industria de grupos electrógenos durante más de 10 años que pueden brindar una solución técnica rápida y efectiva a tiempo.nuestra garantía: proporcionamos un año o 1000 horas de funcionamiento, lo que ocurra primero como período estándar. y partes consumibles con filtros de aire, combustible, aceite lubricante incluidos, todas las fallas y daños debidos al mal funcionamiento o negligencia del manual de mantenimiento y operación están fuera del alcance de nuestra garantía.nuestros compromisos:Todos los productos han pasado la estricta prueba de fábrica antes del envío para garantizar la alta calidad.los términos de garantía de los productos se aplican estrictamente.línea de montaje y producción de alta eficiencia para garantizar la entrega a tiempo.se ofrecen servicios profesionales, oportunos, reflexivos y dedicados.Se suministran accesorios originales favorables y completos.Se imparte formación técnica periódica e irregular durante todo el año.El centro de servicio al cliente 24/7/365 brinda respuestas rápidas y efectivas debido a la demanda de servicio al cliente.
    • 8
    • 8Años
    • historia
    • 15000
    • 15000m2
    • área ocupada
    • 120
    • 120+
    • empleados
    • 24
    • 24*7*365
    • Servicio
Más sobre
vídeo
la marca de energía ukkms gongtai se centra en el objetivo de "crear un proveedor de producción de grupos electrógenos de emergencia de clase mundial" y "reposicionar el mundo para que sea 'hecho en China'"
Más videos
Últimas noticias
  • Selection of enterprise-owned diesel generator capacity
    Selection of enterprise-owned diesel generator capacity There is currently no unified calculation formula in the country for selecting the capacity of self-provided diesel generator sets, so the methods used by designers in actual work are also different: some simply determine it based on 10%-20% of the power transformer capacity; Some are added according to the capacity of fire-fighting equipment; some are selected according to the wishes of investors, which results in inaccuracy in selecting the capacity of self-provided generating units. If the capacity is selected too large, it will cause a waste of investment; if the capacity is selected too small, it will cause a waste of investment in the event of an accident. Cannot meet usage requirements. So, how to choose the capacity of self-provided generating units? After reviewing the information and referring to various experiences and practices of peers, the author summarized the following points: (1) Plan or preliminary design stage The capacity of the self-provided generator is calculated as 10%-20% of the total capacity of the power supply transformer. (2) Construction drawing stage (1) Select generator capacity according to calculated load We know that the electrical load of a building can be divided into three categories: The first category is security load, which is a load that ensures the safety and reliable operation of people and equipment in the building, such as fire pumps, fire elevators, smoke prevention and exhaust equipment, emergency Lighting, communication equipment, important computers and related equipment, etc.; the second category is support load, that is, the basic equipment load to ensure the operation of the building, mainly work area lighting, some elevators, passage lighting; the third category is general load, that is Loads other than the above loads, such as air conditioners, water pumps and other general lighting and power equipment. When calculating the capacity of self-provided generating units, the first type of load must be taken into account, and the second type of load is determined according to the building function and power grid conditions. If the building function requirements are higher or the city power grid power supply is unstable, the second type of load should be considered. Class loads are taken into account, but if the first and second class loads are simply added to select the generator capacity, the selected capacity will be too large, because in the fire-fighting state, only the operation of the fire-fighting equipment needs to be ensured, and the second class load The load is not used; and when the power grid is outage in non-fire-fighting conditions, the fire-fighting equipment is not used. Therefore, the author believes that the larger of the two can be selected as the capacity of the generator set. After the equipment capacity is calculated, the required coefficient Kx is selected according to the actual situation (generally 0.85-0.95), and th...

    Apr

    09 2024
  • Composition and classification of diesel generators
     1. Composition and classification of diesel generators Diesel generator sets for AC power supply, backup and emergency power generation are widely used in many fields of the national economy such as ships and communications. In recent years, the power shortage caused by economic development and uneven resource distribution, especially in the southern coastal areas, has further highlighted the role of diesel generators in the development of the national economy. From hand-started and manned ordinary units to the direction of automation (self-starting, unattended, remote control, remote signaling, telemetry), low emissions and low noise, the technical equipment level of diesel generator sets is constantly improving. Modern diesel generator sets have the characteristics of flexibility, convenience, high degree of automation, low noise and low emissions. With the continuous development of science and technology, the application of some new technologies and new achievements has made modern diesel generator sets have higher intensification, reliability, stability and good emission characteristics, etc., and continue to meet the higher requirements of modern society. (1) Composition Diesel generator set is a type of internal combustion generator set, consisting of a diesel engine, a three-phase AC synchronous generator and a control system (including automatic detection, control and protection devices). The diesel engine, generator and control system (box) of the mobile diesel generator set are all assembled on a common base; while the diesel engine and generator of the larger power stationary unit are installed on a common base welded from steel, and Fixed on a specially designed reinforced concrete foundation, equipment such as the control system and fuel tank of this unit are usually installed separately from the unit. The flywheel housing of the diesel generator and the front end cover of the generator are directly connected in the axial direction using a shoulder positioning method to form an integrated body, and a cylindrical elastic coupling is used to directly drive the generator to rotate through the flywheel. This connection method is fixed together by screws, so that the two are connected into one body, ensuring that the concentricity of the crankshaft of the diesel engine and the rotor of the generator is within the specified range. In order to reduce the noise, diesel generator sets generally need to be installed with special mufflers. In special cases, the unit needs to be fully shielded. In order to reduce the vibration of the unit, shock absorbers or rubber shock absorbing pads are usually installed at the connections between the main components such as the diesel engine, generator, water tank and electrical control box and the public chassis. (2) Classification and functions There are many types of diesel generator sets, which can be divided into the following types according to their structural types, control methods and protecti...

    Mar

    12 2024
  • How to Check the Working Quality of Cummins Diesel Generator Governor
    How to Check the Working Quality of Cummins Diesel Generator Governor 1.Maintain standards The internal parts of the speed regulator are not allowed to be stuck during operation. The movement of various parts must be flexible, and the matching clearance between parts must meet the technical requirements. 2. Maintenance methods (1) Inspection and maintenance of speed regulating rotor parts: 1) When the flying iron frame and bracket rotate, there should be no jamming phenomenon. The rotor bearing is not allowed to be too loose or blocked or burned out. Otherwise, new parts should be replaced. 2) When the wear of the inner end of the fly iron exceeds 0.3 minutes, it should be repaired by welding repair. 3) When the matching gap between the flying iron seat frame bushing and the telescopic shaft exceeds 0.22mm, the bushing should be replaced with a new one. After the bushing is pressed in, it should be hinged with the telescopic shaft to ensure the matching size with the telescopic shaft. (2) Inspection and maintenance of speed control gear components. . The mating surface of the speed control gear sleeve is not allowed to have major scratches and eccentric wear. When the buffer spring is not equipped, the two should be able to rotate freely. If the buffer spring is found to be greatly deformed or damaged or broken during inspection, it should be replaced with new parts. When the buffer spring is in a free state, there should be a certain gap between the groups, and the gap between each piece should be less than 0.2mm. The transition arc and straight part of the assembled buffer spring should fit closely with the flange of the speed control gear and the shaft sleeve, and the contact length with the outer diameter of the bearing should be greater than half of the circumferential length. (3) Inspection and maintenance of speed regulating spring. After removing the speed regulating spring, a visual inspection should be carried out. If damage, cracks or distortion are found, the spring should be replaced with a new one. If the elastic force of the speed regulating spring does not meet the technical requirements, it should also be replaced. 3.Technical requirements (1) When the connecting pins and pin holes of the speed regulator are seriously worn and cannot be repaired, new parts should be replaced. (2) When the wear amount of the fly iron bushing and pin exceeds 0.15~0.20mm, the bushing should be replaced with a new one or the pin with an enlarged size should be replaced. (3) The weight difference between the two flying irons after repair should be less than 3g. (4) The flying iron seat frame should be able to rotate flexibly relative to the bracket by its own inertial force, and the flying iron seat frame should be able to swing freely on the seat frame.    

    Feb

    21 2024
Soluciones
tiene el compromiso de integrar tecnología avanzada en escenarios de aplicación práctica. la marca líder nacional de grupos electrógenos
Suscríbete a nuestro boletín
Regístrese en nuestra promoción mensual y obtenga las últimas noticias sobre productos.

Haga clic aquí para dejar un mensaje.

deja un mensaje
Si está interesado en nuestros productos y desea conocer más detalles, deje un mensaje aquí, le responderemos lo antes posible.

Casa

Productos

acerca de

contacto